This kit includes upgraded 3" wide blocks for your LCA bow press. Install these blocks onto any LCA press that is copper in color. By upgrading, you'd remove the narrow 2.5" blocks and install wider 3" blocks to help accommodate wider limb compound bow models. Interchange the blocks easily following a few simple steps.

Wider base to accommodate wider limb bows
Larger mounting bolts for reinforced strength
More room for finger adjustments in and out

Includes:

2 - 3" blocks
2 - 3" spring steel plates
4 - 5/16 mounting bolts
2 - Springsteel mounting screws
2 - Nut plates
If you have any LCA green or Pack-N-GO bow press models, purchase the 3" Pin Kit.

Warning! Those who have an LCA bow press. Please always tighten your press block screws periodically. If the bolts holding the blocks onto the bow press are loose, it can cause the bolts to become damaged. For the bolts to have full strength, they must be tight. You can tighten the bolts by removing the metal spring from the press block. The two bolts will reveal themselves underneath once you remove the spring. It's crucial to check these bolts periodically to ensure they are tight.

Kunden, die diesen Artikel gekauft haben, kauften auch: